Install electric starter mower

A starter, battery, regulator, and wire harness will need to be added to your lawn mower. It is possible with some types of lawn mowers. This post may include affiliate links. Purchases made through these links may provide a commission for us, at no extra cost to you.

As an Amazon Associate we earn from qualifying purchases. Not every engine is created equal and, contrary to what many people believe, they are not all the same. Manufacturers that utilize electric start on their mowers have designed them to be compatible with starters. When a manufacturer specs out an engine an electric start requires many engine components and it is not just a quick add on.

In order to convert an engine to an electric start the correct way your engine must have the following:. Holes in the engine block will not be pre-drilled and tapped for a place to mount your started.

You will also need brackets added to support the starter. A battery needs a place to be mounted on lawn mower. Under the flywheel, there needs to be mounts and holes drilled to accept a stator. The stator is a component that needs to be added to charge the battery. The flywheel will need to have a ring gear mounted on it. A wire harness will need to be added that runs from the engine to the starter and then to the battery. There will be mounting bosses or holes for a starter to attach to.

One may also ask, how does electric start mower work? The engine is started by the user, who pulls a rope that spins a pulley that connects to the crank shaft and then the flywheel.

An electric starter uses either an electrical plug or a battery to charge a motor that spins to turn the crankshaft rather than relying on manpower to pull a cord. The crankshaft is connected to the blade shaft on your recoil start walk behind lawn mower , so if the pull cord is stuck, it could be because something is blocking the movement of the blade.

Disconnect the spark plug for safety, then take a look under the deck. Grasp the handle of the starter cord, and pull sharply. The engine should turn over on the first pull, but if it doesn't, pull repeatedly until it does. If the engine doesn't start after five pulls, and you smell gas, let the mower sit idle for 10 minutes. The carburetor is probably flooded, and it needs to drain. Tired of huffing and puffing to get the small engine on your lawnmower , snowblower or generator started by pulling a cord?

You may be able to install a 12V electric starter, but it depends on the engine. For example, if your machine has a Tecumseh engine, you may or may not be able to convert it to electric start. How does a pull start engine work? Connect the black negative lead to the negative - battery terminal. Connect the leads to the battery by pushing the female connector on the end of the leads onto the male flat connector terminal on the battery.

Place the cover back on the case and push down to snap it securely in place. Keith Dooley has done work in the field of landscaping and design for more than 10 years. He has implemented his own designs, as well as pulled from techniques learned through studies, creating many landscapes for others to enjoy. He has also maintained lawns, athletic fields, town parks, large gardens and game fields.